| BORERS |
| Nothing available at this time |
|
|
| LATHES |
|
|
 |
YUNNAN CY6250B
CENTRE LATHE
500mm Swing 2000mm Between Centres. 85mm Spindle Bore. D1-8 Camlock. 5MT Tailstock. 15HP 415V Motor. Speeds 9-1600 RPM (24). 320mm 3 Jaw & 400mm 4 Jaw Chucks. 600mm Faceplate. Fixed & Travelling Steadies. Taper Turning Attachment
STOCK REF: 3716
|
$10,450 inc GST
|
 |
TOS SN71B
CENTRE LATHE
710mm Swing 4000mm Between Centres. 80mm Spindle Bore. Slip Ring. 5MT Tailstock. 10HP 415V Motor. Speeds 10-1000 RPM (16). 500mm 4 Jaw Chuck. Fixed Steady. Algra QCTP and 3 Holders. 2 Axis Newall DRO Fitted.
STOCK REF: 3707
|
$13,200 inc GST
|
 |
MAZAK MARK II
CENTRE LATHE
700mm Swing 3000mm Between Centres. 80mm Spindle Bore. D1-8 Camlock. 5MT Tailstock. 15HP 415V Motor. Speeds 15-1500 RPM (16). 355mm 3 Jaw & 500mm 4 Jaw Chucks. 500mm Faceplate. Fixed & Travelling Steadies. Power Drilling Attachment.
STOCK REF: 3041
|
$17,600 inc GST
|
 |
CHIANG NING HG28
CENTRE LATHE
280mm Swing 800mm Between Centres. 38mm Spindle Bore. 3MT Tailstock. 2.6KW 415V Motor. Speeds 34-1800 RPM (10). Footbrake. 3 JAw & 4 Jaw Chucks. Faceplate. Fixed Steady.
STOCK REF: 2366
|
$3,300inc GST
|
 |
TARNOW TUJ-50M
CENTRE LATHE
560mm Swing x 3000mm Between Centres. 90mm Spindle Bore. D1-11 Camlock. 11KW 415V Motor. 20-1600 RPM (18) 5MT Tailstock. 315mm 3 Jaw and 400mm 4 Jaw Chucks. Face and Drive Plates. Fixed and Travelling Steadies.
STOCK REF: 2737
|
$11,000 inc GST
|
| MILLING MACHINES |
 |
KIHEUNG
BED MILL
ISO 50 Spindle. 2200x550mm Table. 1600mm Longitudinal Travel. 720mm Cross Travel. 7.5Kw 415V Motor. 40-1600 RPM (12). 20mm Table Slot. 3 Axis Jenix DRO Fitted. Assorted Tooling. Made in Korea
STOCK REF: 3420
|
$60,500 inc GST
|
 |
DOALL FV-12B
BED MILL
ISO 50 Spindle. 1700x510mm Table. 1220mm Longitudinal Travel. 525mm Cross Travel. 12HP 415V Motor. 42-2550 RPM (18). 3 Axis Sony DRO Fitted. Made in Spain
STOCK REF: 3318
|
$33,000 inc GST
|
 |
DELTA 185V
TURRET MILL
ISO40 Spindle. 1270x320mm Table. 700mm Longitudinal Travel. 500mm Cross Travel. 5HP 415V Motor. 50-3750 RPM. 5/8" Table Slot. Variable Speed Head. Longitudinal and Cross Power Feeds. Rapid Rise and Fall to the Knee. Low Volt Light. Coolant System. 3 Axis Sony DRO fitted.
STOCK REF: 3717
|
$10,175 inc GST
|
 |
DELTA 185V
TURRET MILL
ISO40 Spindle. 1475x320mm Table. 1000mm Longitudinal Travel. 350mm Cross Travel. 5HP 415V Motor. 50-3750 RPM. 5/8" Table Slot. Variable Speed Head. 200mm Riser Block Fitted. Pendant Controls.
STOCK REF: 2739
|
$8,500 inc GST
|
| SAWS |
 |
BROBO WALDOWN S350D
COLD SAW
Dual Swivel. Capacity at 90 Deg 115mm Dia. Balde Size: 350mm Dia x 40mm Bore. Speeds: 21 and 42 RPM. 1.5KW Motor. Coolant System. Includes 3000mm Infeed and 3000mm Outfeed Conveyors.
STOCK REF: 3658
|
$4,180 inc GST
|
 |
COSEN S260HA
AUTOMATIC BANDSAW
Capacity at 90 Deg 250mm. 27mm Blade. Speeds: Variable 20-85 m/min. 3HP 415V Motor. Coolant System. Hitch Feed.
STOCK REF: 2750
|
$5,500 inc GST
|
 |
DO-ALL
AUTOMATIC BANDSAW
Capacity at 90 Deg 325mm Round. Hitch Feed.
STOCK REF: 3732
|
$7,000 inc GST
|
 |
KASTO PBA660U/AU
TWIN COLUMN HORIZONTAL BANDSAW
Capacity: 660mm Round. C/W In and Out Feed Conveyors, Chip Conveyor.
STOCK REF: 3733
|
$18,000 inc GST
|
| DRILL PRESSES |
 |
MODIGS RBM28
RADIAL ARM DRILL PRESS
500mm Arm x 3MT Spindle. 500mm Dia. Table. .75kw 415V Motor. Spindle Speeds 100-1280 RPM (8). Made in Sweden.
STOCK REF: 3429
|
$1,375 inc GST
|
| EDM |
| Nothing used at this time. New machines available |
|
|
| GRINDERS |
 |
KENT KGS250AH
SURFACE GRINDER
Full Hydraulic Operation. 7" Wheel. Coolant System. 400mm x 200mm Magnetic Chuck Parallel Wheel Dresser. 415V 1-1/2HP Motor.
STOCK REF: 1392
|
$9,625 inc GST
|
| PUNCH & SHEAR |
| Nothing used at this time. New machines available |
|
|
| SHEETMETAL |
 |
IMPERIAL
HYDRAULIC PAN BRAKE
2450mm x 3.0mm Mild Steel Capacity. Hydraulic Clamp.
STOCK REF: 3720
|
$8,800 inc GST
|
 |
JOHN HEINE MODEL 40B
MECHANICAL GUILLOTINE
1200mm x 2.0mm Mild Steel Capacity. Rear Safety Guard. Adjustable Back Guage.
STOCK REF: 3720
|
$3,850 inc GST
|
| WOODWORKING |
 |
WOODFAST
PANEL SAW
100mm Capacity. 315mm Dia. TCT Blade. Adjustable Rip Fence. 2HP 415V Motor.
STOCK REF: 3567
|
$880 inc GST
|
 |
WOODFAST
WOOD LATHE
250mm Swing Over Bed. 900mm Between Centres. Screw Spindle Nose. 415V Motor. Toolrest and Face Plate.
STOCK REF: 3417
|
$1,650 inc GST
|
 |
MASPORT
VERTICAL BANDSAW
300mm Throat. 10mm Blade. 0.75HP 415V Motor. Tilting Table.
STOCK REF: 3418
|
$550 inc GST
|
| MISCELLANEOUS |
 |
CROWN 10H57
MANUAL FORKLIFT
Safe working load 1000 lbs..
STOCK REF: 2888
|
$1,100 inc GST
|
 |
CIG TAE90-1
SPOT WELDER
6KVA Capacity.
STOCK REF: 2702
|
$990 inc GST
|
